BYWKD - ULTRA GLAZE, 454
- MSDS: BYWKD
- Manufacturer: FIBRE GLASS EVERCOAT CO INC
- Product Name: ULTRA GLAZE, 454
- National Stock Number: 8030-00N063044
Product Identification
Product ID:ULTRA GLAZE, 454
MSDS Date:04/01/1993
FSC:8030
NIIN:00N063044
MSDS Number: BYWKD
Responsible Party
CINCINNATI, OH 45242
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 800-729-7600
Cage: 18731
Contractor
Telephone: 513-489-7600
Cage: 18731
Ingredients
4.50 MM HG
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: 25-30%
OSHA PEL 100 PPM
ACGIH TLV: S,50PPM/100STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 10-15%
OSHA PEL 20 MPPCF Z-3
ACGIH TLV: 2 MG/M3 RDUST
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 10-15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 0-5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:CONTACT WITH LIQUID OR
VAPOR MAY RESULT IN IRRITATION, REDNESS, TEARING AND BLURRED
VISION. SKIN:CONTACT WITH WET MATERIAL MAY RESULT IN IRRITATION AND
POSSIBLE DERMATITIS. INHALATION:EXCES SIVE INHALATION OF VAPORS MAY
CAUSE NASAL AND RESPIRATORY IRRITATION, ACUTE NERVOUS SYSTEM
DEPRESSION, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE:IARC MONOGRAPHS, SUPPLEMENT VOL
7, PG 345, 1987:GROUP 2B ANIMAL:NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZS:FATG, WEAK, NAUS, HDCH & DIZZ.
INGESTION:MAY CAUSE GI IRRIT, NAUS, DIARR & VOMIT. ASPIR OF MATL
INTO LUNGS DUE TO VOMIT MAY PRDCE CHEM PNEUM WHICH CAN BE FATAL.
CHRONIC:EXCESSIVE OVEREXP TO STYRENE HAS BEEN FOUND TO CAUSE
FOLLOWING EFTS IN LAB ANIMALS:LIVER ABNORMALITIES, KIDNEY AND LUNG
DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH IMMED W/LG AMTS OF WATER FOR AT LEAST 15 MINUTES.
SEE PHYSICIAN FOR MEDICAL TREATMENT. SKIN:IMMED WASH AFFECTED AREA
W/SOAP & WATER. REMOVE CONTAM CLTHG. CONSULT MD IF IRRIT DEVELOPS.
INHAL :REMOVE TO FRESH AIR. RESTORE BREATHING. KEEP PERSON WARM AND
QUIET. TREAT SYMPTOMATICALLY. GET MED ATTN. INGEST:KEEP PERSON WARM
AND QUIET. CONSULT MD OR POISON CONTROL CENTER IMMEDIATELY.
Fire Fighting
Flash Point:88.0F,31.1C
Lower Limits:1.1%
Extinguishing Media:FOAM, CARBON DIOXIDE AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER MAY BE USED TO COOL CNTNRS TO PVNT
PRESS BUILDUP WHICH MAY RUPTURE CONTAINERS.
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & MAY TRAVEL ALONG FLOOR
& BE IGNITED BY SPKS/FLAMES AT DIST FROM WHERE MATL IS BEING USED.
POLYM MAY OCCUR UNDER FIRE CNDTNS. POLYM IN(SUPDAT)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE THE
AREA. WEAR PROTECTIVE EQUIPMENT (SEE CONTROL MEASURES). AVOID
BREATHING VAPORS. CONTAIN SPILL. COLLECT WITH INERT ABSORBENT AND
REMOVE. DISPOSE OF PROPERL Y.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE MATL IN COOL, WELL-VENT AREA. DO
NOT STORE AT TEMPS ABOVE 75F. DO NOT USE/STORE NEAR HEAT, SPKS/OPEN
FLAME. KEEP CNTNRS TIGHTLY CLSD.
Other Precautions:THIS MATL MUST BE CATALYZED PRIOR TO USE. WET MATL
WILL HAVE HAZ PROPERTIES OF BOTH COMPONENTS. PLEASE REFER TO MSDS
FOR CATALYST. IF PROD IS TO BE SANDED, PEL/TLV OF 10 MG/M3 FOR
NUISANCE DUSTS SHOUL D BE OBSERVED. KEEP OUT OF REACH(SUPDAT)
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS DESIGNED TO
REMOVE PARTICULATE MATTER AND ORGANIC SOLVENT VAPORS.
Ventilation:GEN DILUTION/LOC EXHST VENT SHOULD BE PROVIDED TO KEEP
EXPOS BELOW ACCEPTABLE LIMS & TO KEEP SOLV VAPS BELOW (SUP DAT)
Protective Gloves:NEOPRENE OR NATURAL RUBBER.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:IMPERMEABLE CLOTHING SHOULD BE WORN TO
PREVENT PROLONGED OR REPEATED CONTACT OF WET MATERIAL WITH SKIN.
Work Hygienic Practices:ALWAYS WASH HANDS AFTER USING THIS MATERIAL,
AND BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
EXPLO HAZS:CLOSED CONTAINER CAN CREATE PRESSURE BUILD-UP WHICH MAY
CAUSE RUPTURE OF THE CONTAINER. OTHER PREC:OF CHILDREN. DO NOT TAKE
INTERNALLY. AVOID CONTACT WITH EYES AND SKIN. VENT:THE LOWER EXPL
OSION LIMIT.
Chemical Properties
Boiling Pt:B.P. Text:293F,145C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.95
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:25.0
Stability
Stability Indicator/Materials to Avoid:YES
PEROXIDES, STRONG OXIDIZERS, STRONG MINERAL ACIDS AND POLYMERIZATION
CATALYSTS.
Stability Condition to Avoid:HIGH TEMPERATURES, IGNITION SOURCES AND
CONTACT WITH INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:FUMES MAY BE PRDCED WHEN MATL IS
HEATED TO DECOMP. FUMES MAY CNTN CARBON MONOXIDE, CARBON DIOXIDE &
VARIOUS HYDROCARBS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS. BEFORE ATTEMPTING CLEAN-UP OR DISPOSING OF
MATERIAL, REFER TO HAZARD INFORMATION IN OTHER SECTIONS OF THIS
MSDS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.